The operating table is a platform for performing surgical operations and anesthesia. With the development of society, it is more and more common for people to use electric operating tables. It not only makes the operation more convenient and labor-saving, but also enhances the safety and stability of patients in different positions. So what should be paid attention to when using electric operating table?

1. The electric operating table is a permanent installation device. The power input line must be inserted into the three sockets with grounding wires prepared in advance by the medical institution, so that it is fully grounded and connected to the shell, which can effectively avoid the occurrence of electric shock when the leakage current exceeds the standard; And it can effectively avoid the accumulation of static electricity, friction and sparking, and the risk of explosion in the environment of anesthetic gas in the operating room, and it can also avoid potential electromagnetic interference between equipment or accidents.

2. The main power source of the electric operating table, the electric push rod and the pneumatic spring, are all enclosed in hidden parts. During maintenance and inspection, please do not disassemble the internal parts at will, so as not to affect normal use.

3. Please read the manual carefully before using this product.

4. The operation of the electric operating table must be carried out by medical personnel trained by the manufacturer. After adjusting the lifting and turning of the electric operating table, the hand-held operating device must be placed in a place not suitable for medical personnel to touch, so as to avoid misoperation and cause electric The operating table moved or turned, causing the patient to accidentally injure again, and the condition worsened.

5. In use, if the network power fails, the emergency battery power supply can be used at this time.

6. ​​Replacement of melting appliance: please contact the manufacturer, do not use too large or too small melting appliance.

7. Cleaning and disinfection: After each operation, the operating table pad must be cleaned and disinfected.

8. After each operation is completed, the electric operating table should be placed in a horizontal position (pay special attention to the rise of the leg plate) and then lowered to the lowest position, and the power plug should be unplugged, so that both the live and neutral wires are cut off and all separated from the power .

The above are related issues that need to be paid attention to when using electric operating table medical equipment. If you have a demand for electric operating table and other medical equipment, please contact us in time.